0102030405
Eco-Friendly Dry Mold Paper Machine from China Suppliers - Biodegradable, Recyclable, Healthy Solutions from Our Factory
Technical Data
| SN | Item | Specification |
|---|---|---|
| 1 | Output | 170 pcs/min |
| 2 | Raw Material |
Environmental Paper rolls
Raw paper is similar as paper cup raw material without PE coating
|
| 3 | Max Paper Layers |
3-9 layers
( first and last layer paper can be 60-80 gsm)
(middle layer paper can be 100- 150gsm)
|
| 4 | Material Thickness | 600-1000gsm |
| 5 | Total Power | 65KW |
| 6 | Power Supply | 380V,50HZ (220V 60HZ) (3 Phase, 4 Wire) |
| 7 | Air | >2m³/min |
| 8 | Operator required |
Lamination part machine 1 or 2 workers,
Forming machine 1 worker
Glue sealing part 1 worker
Total workers about 3-4person needed
|
| 9 | Installation Area | 100㎡ |
| 10 | Weight | 10T |
Making process
Paper feeding
Layer coating/Laminating/Die cutting
Forming/Glue sealing /Drying
1. Glue layer coating & Lamination & Die cutting part machine
- Layer coating the raw paper with environmental protection glue
- Hot pressing and laminating 9 layers paper to 1 layer paper
- Out of shape with die cutting mold( Cutting mold is replaceable ), Max speed 300pcs/min
- Semi-finished product stack on the conveyor belt and move to pick up spot
- Hot pressing and laminating 9 layers paper to 1 layer paper
- Out of shape with die cutting mold( Cutting mold is replaceable ), Max speed 300pcs/min
- Semi-finished product stack on the conveyor belt and move to pick up spot
2. Forming part machine
- Manually place the knife, fork or spoon into the fixed fixture
- Manipulator slide to forming station with semi-finished product (1 upper mold, 2 lower molds)
- Forming a complete shape, Max forming speed 170pcs/min
- Finished products are stacked on the conveyor belt and move to pick up spot
- Manipulator slide to forming station with semi-finished product (1 upper mold, 2 lower molds)
- Forming a complete shape, Max forming speed 170pcs/min
- Finished products are stacked on the conveyor belt and move to pick up spot
3. Glue Sealing & Drying part machine
- Manually place the knife, fork or spoon into the fixed fixture
- Place finished product to rubber clip by manipulator
- Move to glue station finish glue sealing process with rail device
- Pick up sealed product after high temperature drying
- Place finished product to rubber clip by manipulator
- Move to glue station finish glue sealing process with rail device
- Pick up sealed product after high temperature drying
Paper cutlery feature
💧 Water proof
🍳 Anti Oil
🔥 Temperature-resistance
One Line Equipment Layout Drawing
One Line Include 3 sets machine as below
I. Pre-coating & Lamination & Die cutting part machine (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control system | Inovance | 1set |
| Die cutting servo motor | 1.5kw Inovance | 1pc |
| Roller servo motor | 1kw Inovance | 8pcs |
| Die cutting servo motor | 4.4kw Inovance | 1pc |
| Temperature module | Made in China | 2pcs |
| Electrical | Schneider | Whole line |
| Air cylinder | Airtac,Taiwan | 24pcs |
| Powder tension controller | 5kg Made in China | 9pcs |
| Air shaft | 76mm Made in China | 9pcs |
II. Forming Machine parameter
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Delta Taiwan | 1pc |
| PLC Control system | Delta Taiwan | 1pc |
| Manipulator servo motor | 0.75kw Inovance | 4pcs |
| Temperature module | Made in China | 1pc |
| Pressure Cylinder | 20T Made in China | 2pcs |
| Vacuum pump | 25L Made in China | 1pc |
| Electrical | Schneider | Whole line |
III. Sealing Machine parameter (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control System | Inovance | 1pc |
| Glue disk servo motor | 0.4kw Inovance | 1pc |
| Pathway servo motor | 2kw Inovance | 1pc |
| Manipulator servo motor | 0.4kw Inovance | 1pc |
| Temperature module | Made in China | 1pc |
| Electrical | Schneider | Whole line |
| Heating tile | Made in China | 64pcs |
Paper：Surface 63g kraft paper + middle layer 118g kraft paper
Raw paper / non-plastic coating paper
Binder supplier recommend
1. Paper laminate layer coating binder
2. Sealing binder
Test report（Component Analysis，REACH）
Frequently Asked Questions
What is the production output of the paper cutlery forming machine?
The machine has an output capacity of up to 170 pcs/min for the forming process, and up to 300 pcs/min for the die-cutting process.
What raw materials are required for making paper cutlery?
It uses environmental paper rolls. The raw paper is similar to paper cup raw material but without any PE or plastic coating.
How many layers of paper can be laminated together?
The machine supports laminating 3 to 9 layers of paper. The surface layers (first and last) typically use 60-80 gsm kraft paper, and the middle layers use 100-150 gsm paper.
What are the main features of the produced paper cutlery?
The finished paper cutlery products feature water resistance, oil resistance, and temperature-resistance.
How many operators are needed to run the entire production line?
A total of 3 to 4 workers are required: 1-2 workers for the lamination part machine, 1 worker for the forming machine, and 1 worker for the glue sealing part.
What are the power and space requirements for installation?
The total power requirement is 65KW with a 380V 50HZ (or 220V 60HZ) 3-phase 4-wire power supply. The required installation area is approximately 100㎡.