China Suppliers Dry Mold Paper Machine - Eco-Friendly, Biodegradable, and Recyclable Paper Production Factory
Technical Data
| SN | Item | Specification |
|---|---|---|
| 1 | Output | 170 pcs/min |
| 2 | Raw Material |
Environmental Paper rolls Raw paper is similar as paper cup raw material without PE coating |
| 3 | Max Paper Layers |
3-9 layers ( first and last layer paper can be 60-80 gsm) (middle layer paper can be 100- 150gsm) |
| 4 | Material Thickness | 600-1000gsm |
| 5 | Total Power | 65KW |
| 6 | Power Supply | 380V,50HZ (220V 60HZ) (3 Phase, 4 Wire) |
| 7 | Air | >2m³/min |
| 8 | Operator required |
Lamination part machine 1 or 2 workers, Forming machine 1 worker Glue sealing part 1 worker Total workers about 3-4person needed |
| 9 | Installation Area | 100㎡ |
| 10 | Weight | 10T |
Making process
Paper feeding
Layer coating/Laminating/Die cutting
Forming/Glue sealing /Drying
- Layer coating the raw paper with environmental protection glue
- Hot pressing and laminating 9 layers paper to 1 layer paper
- Out of shape with die cutting mold (Cutting mold is replaceable), Max speed 300pcs/min
- Semi-finished product stack on the conveyor belt and move to pick up spot
- Manually place the knife, fork or spoon into the fixed fixture
- Manipulator slide to forming station with semi-finished product (1 upper mold, 2 lower molds)
- Forming a complete shape, Max forming speed 170pcs/min
- Finished products are stacked on the conveyor belt and move to pick up spot
- Manually place the knife, fork or spoon into the fixed fixture
- Place finished product to rubber clip by manipulator
- Move to glue station finish glue sealing process with rail device
- Pick up sealed product after high temperature drying
Paper cutlery feature
One Line Equipment Layout Drawing
One Line Include 3 sets machine as below
I. Pre-coating & Lamination & Die cutting part machine (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control system | Inovance | 1set |
| Die cutting servo motor | 1.5kw Inovance | 1pc |
| Roller servo motor | 1kw Inovance | 8pcs |
| Die cutting servo motor | 4.4kw Inovance | 1pc |
| Temperature module | Made in China | 2pcs |
| Electrical | Schneider | Whole line |
| Air cylinder | Airtac,Taiwan | 24pcs |
| Powder tension controller | 5kg Made in China | 9pcs |
| Air shaft | 76mm Made in China | 9pcs |
II. Forming Machine parameter
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Delta Taiwan | 1pc |
| PLC Control system | Delta Taiwan | 1pc |
| Manipulator servo motor | 0.75kw Inovance | 4pcs |
| Temperature module | Made in China | 1pc |
| Pressure Cylinder | 20T Made in China | 2pcs |
| Vacuum pump | 25L Made in China | 1pc |
| Electrical | Schneider | Whole line |
III. Sealing Machine parameter (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control System | Inovance | 1pc |
| Glue disk servo motor | 0.4kw Inovance | 1pc |
| Pathway servo motor | 2kw Inovance | 1pc |
| Manipulator servo motor | 0.4kw Inovance | 1pc |
| Temperature module | Made in China | 1pc |
| Electrical | Schneider | Whole line |
| Heating tile | Made in China | 64pcs |
Paper: Surface 63g kraft paper + middle layer 118g kraft paper
Raw paper / non-plastic coating paper
Binder supplier recommend
1. Paper laminate layer coating binder
2. Sealing binder
Test report（Component Analysis，REACH）
Frequently Asked Questions
The machine has an output capacity of 170 pcs/min, while the die cutting part can reach a max speed of 300 pcs/min.
It uses environmental paper rolls, similar to paper cup raw material without PE coating (non-plastic coating paper). The surface layer is typically 63g kraft paper, and the middle layer is 118g kraft paper.
The equipment can laminate 3 to 9 layers of paper. The first and last layers can range from 60-80 gsm, while the middle layers can range from 100-150 gsm, with a total material thickness of 600-1000gsm.
A total of about 3 to 4 workers are needed: 1 or 2 workers for the lamination part machine, 1 worker for the forming machine, and 1 worker for the glue sealing part.
The equipment requires a total power of 65KW with a power supply of 380V, 50HZ (220V 60HZ, 3 Phase, 4 Wire). The installation area required is 100㎡.
The finished paper cutlery products feature water proofing, anti-oil properties, and temperature-resistance.