0102030405
Biodegradable Dry Mold Paper Machine from China Suppliers - Eco-Friendly, Recyclable & Healthy | Factory Direct
Technical Data
| SN | Item | Specification |
|---|---|---|
| 1 | Output | 170 pcs/min |
| 2 | Raw Material |
Environmental Paper rolls
Raw paper is similar as paper cup raw material without PE coating
|
| 3 | Max Paper Layers |
3-9 layers
(first and last layer paper can be 60-80 gsm)
(middle layer paper can be 100-150gsm) |
| 4 | Material Thickness | 600-1000gsm |
| 5 | Total Power | 65KW |
| 6 | Power Supply | 380V, 50HZ (220V 60HZ) (3 Phase, 4 Wire) |
| 7 | Air | >2m³/min |
| 8 | Operator required |
Lamination part machine 1 or 2 workers
Forming machine 1 worker
Glue sealing part 1 worker
Total workers about 3-4 person needed
|
| 9 | Installation Area | 100㎡ |
| 10 | Weight | 10T |
Making Process
Paper feeding
Layer coating/Laminating/Die cutting
Forming/Glue sealing /Drying
1. Glue layer coating & Lamination & Die cutting part machine
- Layer coating the raw paper with environmental protection glue
- Hot pressing and laminating 9 layers paper to 1 layer paper
- Out of shape with die cutting mold (Cutting mold is replaceable), Max speed 300pcs/min
- Semi-finished product stack on the conveyor belt and move to pick up spot
2. Forming part machine
- Manually place the knife, fork or spoon into the fixed fixture
- Manipulator slide to forming station with semi-finished product (1 upper mold, 2 lower molds)
- Forming a complete shape, Max forming speed 170pcs/min
- Finished products are stacked on the conveyor belt and move to pick up spot
3. Glue Sealing & Drying part machine
- Manually place the knife, fork or spoon into the fixed fixture
- Place finished product to rubber clip by manipulator
- Move to glue station finish glue sealing process with rail device
- Pick up sealed product after high temperature drying
Paper cutlery feature
1. Water proof
2. Anti Oil
3. Temperature-resistance
One Line Equipment Layout Drawing
One Line Include 3 sets machine as below
I. Pre-coating & Lamination & Die cutting part machine (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control system | Inovance | 1set |
| Die cutting servo motor | 1.5kw Inovance | 1pc |
| Roller servo motor | 1kw Inovance | 8pcs |
| Die cutting servo motor | 4.4kw Inovance | 1pc |
| Temperature module | Made in China | 2pcs |
| Electrical | Schneider | Whole line |
| Air cylinder | Airtac, Taiwan | 24pcs |
| Powder tension controller | 5kg Made in China | 9pcs |
| Air shaft | 76mm Made in China | 9pcs |
II. Forming Machine parameter
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Delta Taiwan | 1pc |
| PLC Control system | Delta Taiwan | 1pc |
| Manipulator servo motor | 0.75kw Inovance | 4pcs |
| Temperature module | Made in China | 1pc |
| Pressure Cylinder | 20T Made in China | 2pcs |
| Vacuum pump | 25L Made in China | 1pc |
| Electrical | Schneider | Whole line |
III. Sealing Machine parameter (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control System | Inovance | 1pc |
| Glue disk servo motor | 0.4kw Inovance | 1pc |
| Pathway servo motor | 2kw Inovance | 1pc |
| Manipulator servo motor | 0.4kw Inovance | 1pc |
| Temperature module | Made in China | 1pc |
| Electrical | Schneider | Whole line |
| Heating tile | Made in China | 64pcs |
Paper: Surface 63g kraft paper + middle layer 118g kraft paper
Raw paper / non-plastic coating paper
Binder supplier recommend
1. Paper laminate layer coating binder
2. Sealing binder
Test report (Component Analysis, REACH)
Frequently Asked Questions (FAQ)
What is the output capacity of the paper cutlery making machine?
The machine has an output capacity of up to 170 pieces per minute.
What kind of raw materials are required for production?
It uses environmental paper rolls. The raw paper is similar to the material used for paper cups but without any PE coating.
How many layers of paper can the machine process?
The machine can process between 3 to 9 layers of paper. Typically, the first and last layers are 60-80 gsm, while the middle layers are 100-150 gsm.
What are the primary features of the finished paper cutlery?
The finished paper cutlery is waterproof, anti-oil, and temperature-resistant.
How many operators are needed to run the entire line?
A total of about 3 to 4 workers are needed: 1 or 2 workers for the lamination machine, 1 worker for the forming machine, and 1 worker for the glue sealing part.
What is the installation area and weight of the equipment?
The complete production line requires an installation area of approximately 100㎡ and has a total weight of 10 Tons.