0102030405
Biodegradable Dry Mold Paper Machine from China Suppliers - Eco-Friendly, Recyclable and Healthy Options Available
Technical Data
| SN | Item | Specification |
|---|---|---|
| 1 | Output | 170 pcs/min |
| 2 | Raw Material |
Environmental Paper rolls Raw paper is similar as paper cup raw material without PE coating |
| 3 | Max Paper Layers |
3-9 layers ( first and last layer paper can be 60-80 gsm) (middle layer paper can be 100- 150gsm) |
| 4 | Material Thickness | 600-1000gsm |
| 5 | Total Power | 65KW |
| 6 | Power Supply | 380V,50HZ (220V 60HZ) (3 Phase, 4 Wire) |
| 7 | Air | >2m³/min |
| 8 | Operator required |
Lamination part machine 1 or 2 workers, Forming machine 1 worker Glue sealing part 1 worker Total workers about 3-4person needed |
| 9 | Installation Area | 100㎡ |
| 10 | Weight | 10T |
Making process
Paper feeding
Layer coating/Laminating/Die cutting
Forming/Glue sealing /Drying
1. Glue layer coating & Lamination & Die cutting part machine
Layer coating the raw paper with environmental protection glue
Hot pressing and laminating 9 layers paper to 1 layer paper
Out of shape with die cutting mold( Cutting mold is replaceable ), Max speed 300pcs/min
Semi-finished product stack on the conveyor belt and move to pick up spot
2. Forming part machine
Manually place the knife, fork or spoon into the fixed fixture
Manipulator slide to forming station with semi-finished product (1 upper mold, 2 lower molds)
Forming a complete shape, Max forming speed 170pcs/min
Finished products are stacked on the conveyor belt and move to pick up spot
3. Glue Sealing & Drying part machine
Manually place the knife, fork or spoon into the fixed fixture
Place finished product to rubber clip by manipulator
Move to glue station finish glue sealing process with rail device
Pick up sealed product after high temperature drying
Paper cutlery feature
1. Water proof
2. Anti Oi
3. Temperature-resistance
One Line Equipment Layout Drawing
One Line Include 3 sets machine as below
I. Pre-coating & Lamination & Die cutting part machine (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control system | Inovance | 1set |
| Die cutting servo motor | 1.5kw Inovance | 1pc |
| Roller servo motor | 1kw Inovance | 8pcs |
| Die cutting servo motor | 4.4kw Inovance | 1pc |
| Temperature module | Made in China | 2pcs |
| Electrical | Schneider | Whole line |
| Air cylinder | Airtac,Taiwan | 24pcs |
| Powder tension controller | 5kg Made in China | 9pcs |
| Air shaft | 76mm Made in China | 9pcs |
II. Forming Machine parameter
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Delta Taiwan | 1pc |
| PLC Control system | Delta Taiwan | 1pc |
| Manipulator servo motor | 0.75kw Inovance | 4pcs |
| Temperature module | Made in China | 1pc |
| Pressure Cylinder | 20T Made in China | 2pcs |
| Vacuum pump | 25L Made in China | 1pc |
| Electrical | Schneider | Whole line |
III. Sealing Machine parameter (Upgraded)
| Item name | Specification | Qt’y |
|---|---|---|
| Touch screen | Inovance | 1pc |
| PLC Control System | Inovance | 1pc |
| Glue disk servo motor | 0.4kw Inovance | 1pc |
| Pathway servo motor | 2kw Inovance | 1pc |
| Manipulator servo motor | 0.4kw Inovance | 1pc |
| Temperature module | Made in China | 1pc |
| Electrical | Schneider | Whole line |
| Heating tile | Made in China | 64pcs |
Paper：Surface 63g kraft paper+middle layer 118g kraft paper
Raw paper / non-plastic coating paper
Binder supplier recommend
1. Paper laminate layer coating binder
2. Sealing binder
Test report（Component Analysis，REACH）
Frequently Asked Questions
What is the production output of this paper cutlery machine line?
The forming machine operates at a maximum speed of 170 pcs/min, while the die cutting part can reach up to 300 pcs/min.
What kind of raw materials are required for production?
It uses environmental paper rolls without PE plastic coating, similar to the raw material used for paper cups.
How many layers of paper can this equipment laminate?
The machine supports hot pressing and laminating 3 to 9 layers of paper. The first and last layers are typically 60-80 gsm, while the middle layers range from 100-150 gsm.
How many operators are needed to run the entire production line?
A total of about 3 to 4 operators are needed: 1 or 2 workers for the lamination part, 1 worker for the forming machine, and 1 worker for the glue sealing part.
What are the key features of the paper cutlery produced by this machine?
The produced paper cutlery features water proofing, anti-oil properties, and high temperature resistance.
What is the total power and installation area required for the equipment?
The equipment requires a total power supply of 65KW (380V, 50HZ or 220V, 60HZ) and an installation area of approximately 100㎡.